RTCA/DO-160 E/F/G test

GRGT has the facilities, accreditations and experience to accurately and efficiently performtesting to a wide range of military and aerospace specifications, including the latest lightningtests.

How is GRGT uniquely qualified to meet your airborne equipment testing requirements?

Full service laboratories in Maryland, California and Texas.

Secure facilities 
 

Highly-trained personnel 
 

One-stop-shop for EMC & Environmental Simulation requirements 
 

Reverberation Chamber for HIRF over 20,000 V/m .
 

45kVA fully programmable power supply with Section 16 Power Input plus Boeing and Airbus specific test software. DC through over 1000Hz output frequency. 1/3-phase output 
 

20kVA variable power supply, 400Hz, 1/3-phase output .
 

Three RF anechoic EMC chambers with 1/3-phase 400Hz RF power filters with Power Factor

Correction Coils (PFCCs) and RF filtered DC power .
 

Up to 150VAC line to ground, 3-phase, 400Hz, 100A per phase, RF filtered power .
 

Up to 277VAC line to ground, 3-phase, 400Hz, 50A per phase, RF filtered power .
 

Acceleration Testing Capabilities up to 40 Gs .
 

GRGT Labs is NVLAP- or A2LA-accredited to perform RTCA/DO160 Commercial Aircraft

Product testing to RTCA/DO-160D (1997), RTCA/DO-160E (2005) & RTCA/DO-160F (2007).

RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.

Section 4 – Temperature and Altitude 
Section 5 – Temperature Variation 
Section 6 – Humidity 
Section 7 – Operational Shocks and Crash Safety 
Section 8 – Vibration 
Section 9 – Explosion Proofness 
Section 10 – Water Proofness 
Section 11 – Fluids Susceptibility 
Section 12 – Sand and Dust 
Section 13 – Fungus Resistance 
Section 14 – Salt Spray 
Section 15 – Magnetic Effect 
Section 16 – Power Input 
Section 17 – Voltage Spike 
Section 18 – Audio Frequency Conducted Susceptibility – Power Inputs 
Section 19 – Induced Signal Susceptibility 
Section 20 – Radio Frequency Susceptibility (Radiated and Conducted) 
Section 22 – Lightning Induced Transient Susceptibility 
Section 24 – Icing 
Section 25 – Electrostatic Discharge (ESD)

GRGT also tests to proprietary aircraft manufacturer standards: 
 

Airbus: ABD0100.1.2 Environmental Conditions and Tests Requirements Associated to

Qualification 
 

Airbus: ABD0100.1.8.1 Electrical and Installation Requirements 
 

Boeing: 787B3-0147 Electrical Power Quality and Design Requirements Document 
 

Boeing: D6-16050-5 Requirements for Electromagnetic Interference Control 
 

HIRF Testing (High Intensity Radiated Fields)

    High Intensity Radiated Fields (HIRF) testing is a form of EMC testing applicable to

equipment that is subject to extreme electromagnetic environments or critical equipment

whose failure would be hazardous to human safety.

   HIRF requirements are applied to ensure that the aircraft electrical and electronic systemsare able to continue safe operation without failure.

HIRF specifications that GRGT performs:

FAA HIRF Rule & Advisory Circular 20-158 
RTCA/DO-160E/F/G
Boeing Requirements 
Airbus Requirements

Please email me the test requirements and sample information.

E-mail address：lisz@grgtest.com